Our shops: RCM CREATIONS · RCM MACHINES
Bancontact - Maestro - MasterCard - VISA

Horl2 diamond roller grinder, PRO

Artikelbild RCHOPRO1
out of stock
This product is currently not available.
Please inform me as soon as the product is available again.

€349.00 *

Incl. VAT, excl. shipping costs
Depending on the delivery address in the EU, the VAT rate of the destination country will be applied.

Temporarily unavailable

  • RCHOPRO
RCHOPRO Horl2 PRO diamond roller grinder Two discs for precise grinding... more
Product information "Horl2 diamond roller grinder, PRO"
RCHOPRO
Horl2 PRO diamond roller grinder
Two discs for precise grinding
 
With the HORL® 2 Pro, Otmar and Timo Horl are realizing a very personal dream. With a high-precision internal planetary gear, a simple rolling movement generates a triple grinding movement. This means that the HORL® 2 Pro grinds at three times the speed of the other HORL® roller grinders. Massive stainless steel and aluminum components ensure a particularly elegant look.
Diamond grinding wheel:
The industrial diamonds used are suitable for all knife steels of all degrees of hardness in order to sharpen efficiently without water.
If used properly, the HORL Diamant Standard never needs to be replaced.
The 46 µm grain size grinds efficiently and precisely.
 
Ceramic honing wheel:
After processing with the HORL Diamond Standard, the ceramic honing wheel significantly refines the grinding result.
The result is a smooth and clean, sharpened knife edge.
 
TWO ANGLES FOR COUNTLESS REQUIREMENTS
 
Stable edge and filigree sharpness
 
The 20 ° sharpening angle ensures a new sharpness in a short time.
In the outdoor area, too, it gives many pocket knives a stable edge and excellent sharpness for everyday use.
 
The 15 ° grinding angle for filigree sharpness
With the 15 ° sharpening angle, particularly fine blades made of damask and high-quality carbon steel are given a delicate sharpness.
These knife edges can be ground very finely.
 
The magnet grinding gauge
The secret to a constant angle.
The combination of a strong neodymium magnet and the HORL S-Pad enables the knife to be securely fixed when sharpening.
 
THREE STEPS TO NEW SHARPNESS
 
1. Loops
Hold the roller grinder by the grip roller and move the HORL diamond grinding disc back and forth in smooth movements without much pressure along the entire cutting edge.
 
2. Peel off
Turn the roller sander 180 ° and repeat step 1 with the ceramic honing wheel to smooth the edge and remove the burr.
 
3. Rotate
Turn the knife and do steps 1 and 2 on the other side of the cutting edge.
This will give you an even sharpness result.
Related links to "Horl2 diamond roller grinder, PRO"
Read, write and discuss reviews... more
Customer evaluation for "Horl2 diamond roller grinder, PRO"
Write an evaluation
Evaluations will be activated after verification.

The fields marked with * are required.

Viewed